voice-call-sms-alert-system-for-temperature-humidity

voice-call-sms-alert-system-for-temperature-humidity

VOICE CALL AND SMS CALL ALERT SYSTEM FOR MONITORING
TEMPERATURE, HUMIDITY, WATER LEAKAGE ETC.

This is a unique system by Vacker Group which makes Voice calls and SMS for various alerts.

This alert system can be used for various critical parameters such as:
• Temperature
• Humidity
• Fire alarm
• Smoke
• Gas leakage
• Water leakage
• Intruder detection
• Any other parameters can be monitored

Features
• The system works with SIM card and has a battery backup for 48 hours.
• The system will make phone calls and SMS to 8 operators and will
deliver a voice message and SMS indicating the type of failure occurred.
• The phone calls will be made until the problem is rectified (This can be
programmed to set a delay)
• In case of power failure, an SMS will be sent immediately.
• All programming can be done by sending SMS
• One authorized person can activate or deactivate the device by sending SMS

There are two models available
VAC-Std
Two inputs – This device can take input from two separate triggering devices. Also it has two outputs. ie. upon receiving a trigger signal it can trigger two external devices.
This device can send voice call and SMS alert to 4 telephone/mobile lines
Two separate voice messages can be recorded.
Example of operation
Input 1 can be connected to temperature recording system of cold room (not included)
Input 2 can be connected to door open contact of server room (not included)

Two voice messages can be recorded on the device
Eg. For Input 1 – Please check the temperature of your server room
Eg. For Input 2 – The door of the server room has been opened

Two SMS messages can be recorded on the device
Eg. For input 1 – Server room check temperature
Eg. For input 2 – Server room check door

Two out puts can be connected to two separate device
Eg. Output 1- connected to a local alarm
Eg. Output 2- connected to a alarm at the security room

The calls and SMS can be programmed in various ways:
Eg. Operator 1 – Phone call + SMS
Eg. Operator 2 – Phone call + SMS

Eg. Operator 3 – SMS only
Eg. Operator 4 – Phone call + SMS

Operation

Case 1
If temperature goes above or below the programmed limits, it will generate a phone call to 4 operators and upon attending the call it will deliver a voice message “Please check the temperature of your server room”. The person who receives the call has to attend the call and acknowledge by pressing the # button. If this person does not attend the call or if he doesn’t press the # button, the call will go to next person and so on.
After attending the call, each person will get a SMS also “Server room check temperature”
Simultaneously the local alarm will be activated. If the problem is not rectified in 5 minutes (this can be programmed) the calls will be made once again and so on.

Case 2
If someone opens the door of server room, it will generate a phone call to 4 operators and upon attending the call it will deliver a voice message “The door of the server room has been opened”. The person who receives the call has to attend the call and acknowledge by pressing the # button. If this person does not attend the call or if he doesn’t press the # button, the call will go to next person and so on.
After attending the call, each person will get a SMS also “Server room check door”.
Simultaneously the alarm at the security room will be activated. If the problem is not rectified in 5 minutes (this can be programmed) the calls will be made once again and so on.

VAC-Plus
Four inputs – This device can take input from Four separate triggering devices.
Also it has Four outputs. ie. Upon receiving a trigger signal from any of the input devices it can trigger four different external devices.
This device can send voice call and SMS alert to 10 telephone/mobile lines
Four separate voice messages can be recorded ie. one for each input device.

Temperature & Humidity Monitoring with Phone call, SMS & Email alert
A typical and most popular application of this device is for recording and
Monitoring of Temperature and Humidity of various applications such as:

• Server Rooms
• Data Center
• Ware houses
• Deep Freezer
• Cold Rooms

This is supplied as a standalone system and is with full battery back up.
If the temperature or humidity goes above or below a certain level for a defined
duration, the system will generate phone call and SMS alerts.
Also the system can be connected to a network for continuous recording and
upon an alert event, an email will be sent to 4 operators

Please see video at http://bit.ly/1ge4hHh & http://bit.ly/1ge4kmz

Posted in

Leave a Reply

Your email address will not be published. Required fields are marked *

*



Choose our products and services