Refrigerator container temperature mapping, validation and finding hot spots

Vacker Group, UAE carries out temperature mapping study service and validation study for vehicles, cold rooms, refrigerators, reefers etc.

Similar articles and you tube videos have been already posted regarding cold rooms and ware houses.

In view of queries from readers, we are further elaborating regarding the protocol for refrigerated containers used for transportation of any temperature controlled goods.

Purpose of Mapping Study

in simple terms the mapping study of a container is carried out to ensure that the entire area of the container operates at uniform temperature as shown in a temperature indicator. Under normal circumstances, a sensor will be placed at any convenient location and readings will be monitored. However under practical conditions, this does not mean that the temperature is uniform across all areas of the container.

The AC units are placed at certain locations which is controlled by thermostats at couple of points. So basically the thermostat decides the operation of the AC. In real life terms it is possible that the entire area of the container may not be at the same temperature.

You might be loading your goods in the entire area and under these conditions the air flow is further limited and it is possible that certain goods may not be at the correct temperature throughout the journey and will never get noticed. Any hot spots will be identified and corrective actions will be recommended in the report

Our service: Temperature Mapping study of vehicles, containers and cold rooms

We carry out the temperature mapping study and validation of the entire refrigerated container to study whether all the areas of the container are within the permitted temperature limits. The protocol for the same is defined in our procedure

We carry out temperature mapping study, certification and validation of the following:

  • Ware houses
  • Cold Rooms
  • Vehicles
  • Refrigerators
  • Refrigerated container
  • Reefer
  • Freezers
  • Walk in chillers
  • Autoclaves

Vacker Group provides these services in UAE, Kuwait, Oman, Qatar, Jordan,Saudi Arabia, Bahrain & Iraq

 

Posted in Temperature Mapping, Temperature Mapping & Validation, temperature qualification, Validation, Validation & Qualification Tagged with: , , , , , , , , , , , , , , , , ,


Choose our products and services