Disposable, Single use USB temperature data logger

Features of economic single use USB temperature Dataloggers

The main advantages of these disposable data loggers over reusable data loggers are as below.

  1. These single-use data loggers are economical, costing a fraction of the price of reusable data loggers.
  2. There are 5 LED alarm indicators on the disposable data logger. It will indicate whether the temperature has exceeded the higher or lower permitted levels. There are two levels of low alert levels (Blue LEDs) and two levels of bookmarks alerts (Red LEDs). Also, there is one Green LED to indicate that no alert was generated.
  3. It is very small in size and easy to attach to any part of a consignment, box etc.
  4. The customer can program the sampling interval between 5 seconds to 17 hours to suit the duration of the trip.
  5. We normally supply the USB data logger in programmed condition. However, the customer can easily reprogram the same any number of times until the first use.
  6. It does not require any particular software for downloading the recorded data. The receiver of the consignment may not have internet connections and hence may not be able to download any special software. Our USB data logger requires only basic computer without any software including Microsoft office.
  7. Even if there is no computer available at the receiving end, the status of recording can be seen on the LEDs on the single-use data logger.
  8. There are separate models available with display and without display. (The model with display required a free software for downloading the data)
  9. For each of them, there are two models available for the USB data logger. One with an inbuilt NIST traceable calibration certificate and the second model without a calibration certificate.
  10. The customer can use the same data logger for 15 days trip, 30-day trip, 45-day trip, 60-day trip, 90-day trip etc. Customer does not need to buy separate data logger for each purpose.  Either we will program the same to meet your trip duration or you can program yourself.
  11. These models comply with 21 CFR Part 11 standards.

VAC-V1 Disposable, Single use, USB Temperature Data Logger with LED indicators (LCD display model available)

This single trip, USB data logger has the following features.

  1. The single-use data logger can record 13,000 readings of temperature alone.
  2. Based on your requirement you can program for a recording interval of one reading per second, one reading per minute, one reading per 5 minutes etc. up to one reading per day.
  3. The logger can operate, measure and record any temperature from -40 °C to +80 °C or -40°F to +176°F.
  4. It is designed in the USA.
  5. It is a highly accurate model with an error of maximum ±0.3°C from -40 °C to +80 °C .
  6. IT has an internal sensor to measure the temperature accurately.
  7. You can make markings during the recordings which you can see in the report.
  8. The readings will be a resolution of 0.01°C, which means that the readings are like 10.02, 10.02 etc.
  9. t will have a maximum error of ±15 minutes per year.
  10. There are 5 LEDs and two buttons on the single-use data logger. One button is for Start and one button is for Stop
  11. Start and stop functions are either manually or through programming.
  12. Start and stop programming can be for a particular date and time.
  13. If you don’t want the recording function immediately upon starting, you can set a delay time. As an example, consider a case where you want to insert into a box of 4°C and the outside temperature is 24°C. If you start the recording manually outside the box, the current temperature will be 24°C. You may not want the first recording to be 24°C. Hence you can set a delay period of 10 minutes. As soon as you start the recording, you can insert into the box. The temperature sensor of the single-use data logger will come down and the first reading will be recorded only after 10 minutes.
  14. You can program 2 high alert levels and 2 low-level alerts. As an example consider medicines stored between 15°C o 25°C. You can set the first high alert at 25°C and the second alert at 30°C. Similarly, you can program the first low alert at 15°C and the second alert at 10°C.
  15. From the above example, if the reading crosses 25°C, the first Red LED will start blinking. If the reading crosses 30°C, the second Red LED will start blinking. Similarly, Blue LEDs will start blinking for lower level alerts. If the temperature was always within 15 to 25°C, the Green LED will be blinking indicating that the temperature has been always within the limits.
  16. Upon completion of recording, you can check the LEDs for the status. Then you can download the complete data with the graph in pdf, Excel or TXT formats. You can simply insert into any PC to generate the reports automatically. It supports all languages generally available on the computer.
  17. The programming of this disposable data logger is using our free software.
  18. If you want inbuilt calibration of the same models, please select our model VAC-V1P, which is pharma compliant model.
  19. The dimensions of the logger are 89mm x 49mm x 4.5 mm.
  20. It has an approximate weight of 10.8 grams.
  21. The battery lasts for 1 to 1.5 years but mainly depends on the operation conditions.
  22. We provide a warranty period of one year from the date of supply or up to the starting of the recording, whichever is earlier.

VAC-V1P Disposable, Single use, USB Temperature Data Logger with LED indicators & Calibration report (LCD display model available)

This model of the single-use, disposable temperature data logger has a calibration report stored in the cloud storage. A link for opening the calibration report is available within the report of each data logger. All other technical details are as per the previous model VAC-V1.

VAC-V1LCD Disposable, Single use, USB Temperature Data Logger with LCD Display

This single trip, USB data logger with LCD display has the following features.

  1. This single-use data logger has an LCD display screen with a size of 30 x 17mm.
  2. The single-use data logger can record 13,000 readings of temperature alone.
  3. Based on your requirement you can program for a recording interval of one reading per second, one reading per minute, one reading per 5 minutes etc. up to one reading per day.
  4. The logger can operate, measure and record any temperature from -40 °C to +80 °C or -40°F to +176°F.
  5. It is designed in the USA.
  6. It is a highly accurate model with an error of maximum ±0.3°C from -40 °C to +80 °C .
  7. IT has an internal sensor to measure the temperature accurately.
  8. You can make markings during the recordings which you can see in the report.
  9. The readings will be a resolution of 0.01°C, which means that the readings are like 10.02, 10.02 etc.
  10. t will have a maximum error of ±15 minutes per year.
  11. There are 5 LEDs and two buttons on the single-use data logger. One button is for Start and one button is for Stop
  12. Start and stop functions are either manually or through programming.
  13. Start and stop programming can be for a particular date and time.
  14. If you don’t want the recording function immediately upon starting, you can set a delay time. As an example, consider a case where you want to insert into a box of 4°C and the outside temperature is 24°C. If you start the recording manually outside the box, the current temperature will be 24°C. You may not want the first recording to be 24°C. Hence you can set a delay period of 10 minutes. As soon as you start the recording, you can insert into the box. The temperature sensor of the single-use data logger will come down and the first reading will be recorded only after 10 minutes.
  15. You can program 2 high alert levels and 2 low-level alerts. As an example consider medicines stored between 15°C o 25°C. You can set the first high alert at 25°C and the second alert at 30°C. Similarly, you can program the first low alert at 15°C and the second alert at 10°C.
  16. From the above example, if the reading crosses 25°C, the first Red LED will start blinking. If the reading crosses 30°C, the second Red LED will start blinking. Similarly, Blue LEDs will start blinking for lower level alerts. If the temperature was always within 15 to 25°C, the Green LED will be blinking indicating that the temperature has been always within the limits.
  17. Upon completion of recording, you can check the LEDs for the status. Then you can download the complete data with the graph in pdf, Excel or TXT formats. You can simply insert into any PC to generate the reports automatically. It supports all languages generally available on the computer.
  18. The programming of this disposable data logger is using our free software.
  19. If you want inbuilt calibration of the same models, please select our model VAC-V1P, which is pharma compliant model.
  20. The dimensions of the logger are 104mm x 47mm x 7 mm.
  21. It has an approximate weight of 18 grams.
  22. The battery lasts for 1 to 1.5 years but mainly depends on the operation conditions.
  23. We provide a warranty period of one year from the date of supply or up to the starting of the recording, whichever is earlier.

Product Description of Single-use temperature recorder

  1. Brief Title of the device: Single-use, Disposable USB type temperature recorder.
  2. Brief Description of the device: USB type temperature recorders. (Buy online at our store.) Disposable type for one-time use only. LED indicators to indicate whether the temperature has gone above or below the permitted levels. It can generate pdf and CSV (opens in Excel) reports without any software related to the data recorder. We can program the programming intervals and alert levels. Customer can also program themselves.
  3. Model number: VAC-MS-ST-S-8
  4. Brand: VackerGlobal
  5. Seller: VackerGlobal
  6. SKU Number: 1000000004
  7. Price (USD): 26.00
  8. Price Validity: 31 December 2021

FAQ of Single-use temperature recording USB loggers

  1. What is a single-use temperature recorder or temperature data logger?
    This is a temperature recorder to record the temperature of medicines, vaccines, food items, fruits vegetables etc. It can record only one time until the memory is full. You can dispose of this recorder after completing the recording.
  2. What is the use of a single-use temperature recorder?
    The main application is during transportation of medicines, vaccines, food items, frozen food, fruits vegetables etc. This is to record the temperature during the transportation period. The consignee can check the recording before accepting the goods.
  3. How to decide whether I should use a single-use or multi-use temperature recorder?
    If you are despatching some items to another state or country, it is ideal to use this disposable logger. If you are using a multiple-use recorder, you may want to collect it after use, since it is costly.
  4. What are the advantages of a single-use temperature recorder?
    These are economical, simple to use devices. These are programmable to suit your needs. You can check the status of the temperature without downloading the data.
  5. What are the disadvantages of a single-use temperature recorder?
    Once the battery is over, you cannot download the data. Hence as soon as you receive the data logger, you have to download the data and keep the reports in a PC. Normally the battery lasts 1 to 2 years based on temperature conditions.
  6. How to use a single-use temperature recorder? Most of the suppliers supply these recorders after programming. Hence you don’t have to worry about programming. Simply press the start button to commence the recording. Upon receipt of the goods at the destination, simply insert into a PC to download the data.

We supply these single-use, disposable data loggers in the United States of America, United Kingdom, Germany, France, Netherlands and all other European countries.

Also, we supply these single-use, disposable data loggers in Asian countries covering India, Pakistan, Hong Kong, Singapore, Srilanka, Bangladesh, Kuwait, Oman, Qatar, United Arab Emirates, Kingdom of Saudi Arabia, Bahrain, Iraq, Afghanistan, Kazakhstan etc. Our Dubai office caters entire Middle East countries including Lebanon, Egypt, Jordan, Libya, Tunisia etc.
In Africa, we supply these single-use, disposable data loggers to all countries including South Africa, Ghana, Angola, Kenya, Algeria, Tanzania, Djibouti, Chad, Rwanda, Uganda, Nigeria, Ethiopia, Morocco, etc.

For more models of single-use, disposable data loggers, please visit our Vacker online store.