Power Failure Phone call & SMS alert for temperature, humidity, water leak, fire, Gas etc.

This is a standalone alert system for generating phone and SMS alert. This is a SIM card based alert system with battery back up. You can use this as an add-on device for our power failure monitor, water leak monitor, temperature monitor etc.

This is a unique system by VackerGlobal which makes Voice calls and SMS to 8 operators.

Following are the major applications for this alert system:

  1. Generating phone calls when the temperature exceeds permitted levels.
  2. When humidity exceeds the specified limits.
  3. In the event of a fire alarm.
  4. phone-call-SMS-alert-for-temperature-humidity-gasleakPhone and SMS alerts in case of detection of smoke.
  5. Generating phone calls to operators in case of gas leakage.
  6. Useful to call multiple personnel in case of water leakage in offices, warehouses, pump houses, basements etc.
  7. Phone calls in case of detection of an intruder into office, home, buildings etc.
  8. Generating alerts in case of Carbon Monoxide beyond permissible limits.
  9. Informing operators in case of Carbon Dioxide leakage.
  10. Call operators in case of Ammonia Leakage.
  11. Giving phone calls and SMS in case of high temperature, power failure or theft attempt at ATMs.
  12. Any other parameters can be monitored

Features of Phone call and SMS alert system

  1. The system works with a SIM card and has a battery backup for 48 hours.
  2. It can make phone calls and SMS to 8 operators. Upon calling it will deliver a voice message and SMS indicating the type of failure occurred.
  3. The phone calls will be made until the problem is rectified (This can be programmed to set a delay)
  4. In case of power failure, an SMS will be sent immediately.
  5. All programming can be done by sending SMS.
  6. One authorized person can activate or deactivate the device by sending SMS.

Models of Phone call & SMS alert system for temperature, humidity, smoke, water leak, Gas alert

There are two separate models as below:

Model VAC-Std with 2 inputs

Two inputs – This device can take input from two separate triggering devices. Also, it has two outputs. ie.phone-call-SMS-alert-for-temperature-humidity-waterleak

upon receiving a trigger signal it can trigger two external devices. This device can send voice call and SMS alert to 4 telephone/mobile lines Two separate voice messages can be recorded.

Example of operation

We can connect Input 1 to temperature recording system of cold room (This is not included). Also, you may connect Input 2 to door open contact of server room (This is not included).

Now record two voice messages on the device:

  1. For Input 1 – Please check the temperature of your server room
  2. For Input 2 – The door of the server room has been opened

For sending SMS, please record two SMS messages as per below examples:

  1. For input 1 – Server room check temperature
  2. For input 2 – Server room check door

It can also carry out local actions using its two outputs as per below examples:

  1. Output 1- connected to a local alarm
  2. Output 2- connected to an alarm at the security room

Based on your needs we can program the calls and SMS in various ways. Few examples of combinations are as below:

  1. Operator 1  – Phone call + SMS
  2. Operator 2  – Phone call + SMS
  3. Operator 3  – SMS only
  4. Operator 4  – Phone call + SMS

Examples of Voice and SMS alert system with a SIM card

Case 1

If the temperature goes above or below the programmed limits, it will generate a phone call. We can program it to 4 operators. Upon attending the call it will deliver a voice message. The message can be “Please check the temperature of your server room”. The person who receives the call has to attend the call. He also has to acknowledge by pressing the # button. If this person does not attend the call or if he doesn’t press the # button, the call will go to the next person and so on.

After attending the call, each person will get an SMS also. As per our example, the message will be “Server room check temperature”.

Simultaneously the system will activate the local alarm. If nobody attends the problem in 5 minutes it will make the calls once again and so on. We can program the 5 minutes delay to any other period.

Case 2

If someone opens the door of the server room, it will generate a phone call to 4 operators. Upon attending the call it will deliver a voice message “The door of the server room has been opened”. The person who receives the call has to attend the call. Also, he has to acknowledge the call by pressing the # button. If he doesn’t do both the actions, the call will go to the next person and so on.

After attending the call, each person will get an SMS. It will read “Server room check door”.

Simultaneously the system will activate the alarm at the security room. If the door remains open after 5 minutes (this can be programmed) the system will make calls once again.

Model VAC-Plus advanced model with 4 inputs

This device can take input from four separate triggering devices.

Also, it has four outputs. This means that upon receiving a trigger signal from any of the input devices it can trigger four different external devices.

This device can send voice call and SMS alert to 8 telephone/mobile lines. We can record four separate voice messages. This means one voice record for each input device.

Temperature & Humidity Monitoring with a Phone call, SMS & Email alert

A typical and most popular application of this device is for recording and Monitoring of Temperature and Humidity. Following are a few of the major applications:

  1. Server Rooms
  2. Data Center
  3. Warehouses
  4. Deep Freezer
  5. Cold Rooms

We can supply this as a complete standalone system and is with full battery back up.

If the temperature or humidity goes above or below a certain level for a defined duration, the system will generate phone call and SMS alerts.

Also, the system can be connected to a network for continuous recording and upon an alert event, an email will be sent to 4 operators.

Product Details of phone call alert system:

  1. Brand Name: VackerGlobal
  2. Price: USD 545.00
  3. Price valid until 31-Dec-2021
  4. SKU: 2005000005
  5. Seller Organization: VackerGlobal

FAQ on Phone call & SMS alert for temperature, humidity, water leak, fire, Gas etc.

  1. How many people can it call? : It can call up to 8 people, one by one. If nobody attends the call, we can program to call repeatedly until someone picks up. Meanwhile, everybody will receive SMS.
  2. Will it work without electricity? : It has a rechargeable battery. The system has to be connected to a power source. But even in case of power failure, it will continue to work for 1-2 days depending on the battery parameters.
  3. When I receive a phone call alert, what would it say? : You can record any custom voice message. When the alert is generated, it will deliver this voice message to you when you attend the phone call.
  4. Where is it manufactured? It is manufactured in Europe.

Please see video at http://bit.ly/1ge4hHh & http://bit.ly/1ge4kmz

Related Articles:

How to decide the number of sensors and location of sensors for a temperature monitoring system?

Posted in temperature monitoring Tagged with: ,

Leave a Reply

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.